Console tables · assembly guide
The Blencathra Console Table
Two X-shaped steel frames screw to the underside of the top. It takes about 5 minutes and needs only a screwdriver. The pictures loop, so watch each one through before you pick up the parts.
How it goes together. Each end of the console stands on one X-shaped steel frame. A flat plate on top of the frame screws straight into the underside of the timber top with 4 screws. There are no pilot holes, so you choose exactly where each frame sits, anywhere from 5 to 15 cm in from the end.
Covering a skirting board?
Your console length
The pictures follow the length you pick.