Console tables · assembly guide
The Bowness Console Table
Two solid timber legs bolt to the underside of the top with steel angle brackets. It is easiest with two people. The pictures loop, so watch each one through before you pick up the parts.
How it goes together. Each leg is a solid timber plank. Two steel angle brackets fix to the top of each leg, one either side, and the other flange of each bracket bolts up into the underside of the top: 2 bolts into the leg and 2 into the top, per bracket. Every hole is drilled in our workshop and every part is lettered, so each leg can only go in its own place: leg AB with brackets A and B at the A–B end, leg CD with brackets C and D at the other. The two legs sit so the gap between them is three quarters of the top's length.
What's in the box
Where the legs go
The holes are drilled in our workshop, so the legs only go in one place. The gap between them is three quarters of the top's length: 90 cm on the 120 cm top shown here.
Front view · 120 cm top