Dining Table Size / Specification

TABLE HEIGHT:

All our table legs are precisely measured at a height of 71cm. This measurement ensures that when combined with a 50mm thickness table top, the total height of the table reaches 76cm (78.5cm with 75mm top). We can make the legs higher or lower if you wish, please contact us direct to enquire about adjusting leg design. 

TABLE LENGTH & WIDTH:

For your convenience, we provide a selection of standard sizes that you can choose from using the dropdown menu's above. However, we understand that you may have specific dimensions in mind for your table. In such cases, we are delighted to offer the option of crafting a custom-sized table tailored to your requirements.

To place an order for a bespoke table size, simply select "Yes" for the "Require a custom table size" option above, and carefully follow the instructions provided. Should you prefer to discuss your specifications with us before placing an order, kindly fill out the below contact form below, and we will promptly get in touch with you.

LEG PLACEMENT (SPACE FOR CHAIRS):

All tables and legs are supplied dissembled, this affords you the option of positioning the legs ideally relative to the desired chair configuration and chair width. Pine is a softwood therefore pilot holes and or threaded inserts are not required. Please note - our size chart assumes a chair width of no more than 50cm. If the chairs are greater than 50cm you will need to recalculate how many chairs will fit around the table.

WAX FINISH 

7 Premium wax polishes or hard wax oil (optional upgrade) finishes to choose from - the table in main picture is finished with clear wax.

INDOOR USE ONLY 

These are indoor tables, if you wish to use outdoors please choose hard wax oil finish and contact us to enquire further.

TIMBER 

Made from 38mm or 50mm Scandinavian Redwood Kiln-Dried Pine with a double coat of Fiddes Premium Wax Polish - Rustic weathered patina. 

LEGS 

80x40mm box section steel and are available in black, raw steel clear lacquer with visible welds or custom powder coat colour. 

ASSEMBLY & FIXINGS 

Table tops and legs are supplied disassembled. Assembly instructions and fixings are supplied with the order. Attaching the legs involves using a Philips screwdriver with the supplied fixings. The flexibility of attaching the legs means that they can be positioned according to the required leg or bench setup i.e. if chairs are needed at each end of the table the legs would be inset further than if only chairs and benches are used at either side. For any further questions regarding assembly please contact us directly as we are more than happy to assist.

AFTER CARE 

Wipe clean only, do not place hot items directly onto the surface.

Please see our guides and resources for further information on caring for your new purchase here

If you have any questions prior to ordering feel free to use live chat, email: hello@acumencollection.co.uk or call 03335771655, we are more than happy to help.

 

This product is made to order.