Console tables · assembly guide
The Warwick Console Table
Two steel frames screw to the underside of the top, then the lower shelf slides through both frames and screws to them. It takes about 5 minutes and needs only a screwdriver. The pictures loop, so watch each one through before you pick up the parts.
How it goes together. Each end of the console stands on one square steel frame with a rail near the floor. A flat plate on top of each frame screws into the underside of the top with 2 screws. The lower shelf is the same length as the top: it slides through both frames, rests on the two rails and overhangs each end like the top, fixed with 2 screws at each frame. The top and the lower shelf are both centred on the frames. There are no pilot holes, so you choose where the frames sit, anywhere from 5 to 15 cm in from the end.
Your console length
The pictures follow the length you pick.